SECTION 5—WHEELS
Part No 1114851 45 Everyday and Sport Series Wheelchairs
FIGURE 5.10 Adjusting Toe In/Toe Out - A4 Camber System - Course Adjustment
NOTE:DONOTtightenthephillipsscrewontheotheradjustmentringatthistime.
NOTE:RepeatSTEPS1‐7ofthisprocedurefortheotheradjustmentringafterrepositioningthe
camberinsert.RefertoAdjustingRearWheelCamberonpage 41.
NOTE:Whenpositioningtheotheradjustmentring,rotatetheringuntilthestopisatthebottom
oftheslotinthecamberclamp.TherightandleftstopsMUSTbepositionedoppositetoeachother
orFineAdjustmentonpage 45willnotworkcorrectly.
NOTE:Whentheleftadjustmentringisadjustedtoacamber,therightadjustmentringwillnot
touchthecamberclampandwhentherightadjustmentringisadjustedtotheothercambertheleft
adjustmentringwillnottouchthecamberclamp.
Fine Adjustment
NOTE:For
thisprocedure,refertoFIGURE 5.11.
NOTE:Thisadjustmentisrequiredanytimethecamberinsertisrepositioned.
1. Openthecamberclamp.RefertoOpening/ClosingCamberClampsonpage 39.
2. Slowlyrotatetheaxletubeuntilthestopontheoppositeadjustmentringispositioned
attheoppositeendofthecamberclamp.
ƽ WARNING
QUICK RELEASE LEVERS - Make sure the quick release levers are pointing
towards the rear of the wheelchair and are in the closed position before using the
wheelchair, otherwise personal injury or damage to the wheelchair may occur.
Stop - Not touching
camber clamp
Adjustment Ring
Camber Clamp
Adjustment Ring
Camber Clamp
Stop - In position for one
camber, touching camber clamp
Stop - In position for one
camber, touching camber clamp
Adjustment Ring
Stop - Not touching
camber clamp
Adjustment Ring