Support User Manuals

Invacare R51LXP Mobility Aid User Manual

Open as PDF

of 76

SECTION 9—UPHOLSTERY/SEAT POSITIONING STRAP

Part No.1106645 44 Nutron® Series

4. Pulltheloosebackcanesoutoftheexistingbackupholstery.

5. Slidetheloosebackcanesintothenewbackupholstery.

6. Securethebackcanestothewheelchairframewiththemountingscrewsandlocknuts

removedinSTEP1.

7. Securethenewbackupholsterytothebackcaneswiththetwo(2)existingupholstery

mountingscrewsandwashers.

FIGURE 9.2 Replacing Back Upholstery

Replacing Seat Positioning Strap

NOTE:Forthisprocedure,refertoFIGURE 9.3.

1. Ifnecessary,removetheseatcushionfromtheseatupholstery.

2. Removethetwo(2)rearphillipsscrewsandwashersthatsecuretheseatupholstery

andseatpositioningstraptothecrossbraces.

3. Removethetwo(2)halvesoftheseatpositioningstrapfromthecrossbraces.

4. Positionthetwo(2)newseatpositioningstraphalvesbetweentheseatupholsteryand

thecrossbraces.

5. Reinstalltherearphillipsscrewsandwashersthatsecuretheseatupholsteryandseat

positioningstraptothecrossbraces.

NOTE:Washerispositionedontopofseatupholstery.

6. Ifnecessary,reinstalltheseatcushionontotheseatupholstery.

Back Upholstery

NOTE:Allfour(4)mounting

screwsandlocknutsareshown.

Eachfold‐downbackcaneuses

two(2)mountingscrews.

Washer

Upholstery

Mounting

Screws

Mounting Screws

Back Cane

Wheelchair Frame

Locknuts

previous next