Filter
Top Products
SECTION 5—WHEELCHAIR OPERATION
Nutron® Series 27 Part No.1106645
SECTION 5—WHEELCHAIR
OPERATION
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Set-up/programming of the Electronic Control Unit is to be performed ONLY by a
qualified technician. The fine tuning adjustments of the controller may affect other
activities of the wheelchair. Damage to the equipment could occur under these cir-
cumstances. IF UNQUALIFIED INDIVIDUALS PERFORM ANY WORK ON
THESE UNITS, THE WARRANTY IS VOID.
Operating the Wheelchair
Turning the Power On/Off
NOTE:Forthisprocedure,refertoFIGURE 5.1.
1. Turnthepoweronbymovingtheon/offswitchupordown.Theswitchautomatically
retractsbacktocenterposition.
NOTE:Afterturningpoweron,allindicators
willlightbriefly,andthedisplaygaugewill
indicateoneofthefollowing:
A. TheCurrentBatteryCharge‐
InformationgaugeshowsallLEDʹslit
orpartialLEDʹslit.
B. OutOfNeutralatPowerUp‐
InformationGaugeshowsallLEDʹs
flashingslowly.Thisoccurswhenthe
poweristurnedonwhenthejoystickis
outofneutral.Thisfeatureprevents
suddenandunexpectedmovementsof
thepowerchair.
2. Turning
thepoweroffcanbeachieved
bymovingtheon/offswitchupor
down.Theswitchautomatically
retractsbacktocenterposition.
FIGURE 5.1 Operating the Wheelchair
INVACARE
Information
Gauge
On/Off
Toggle
Switch