Filter
Top Products
SECTION 8—TILLER ADJUSTMENT
Part No. 1145807 31 Lynx™L-3X
SECTION 8—TILLER ADJUSTMENT
Adjusting the Tiller Angle
ƽ WARNING
Before performing any maintenance, adjustment or service, turn power Off and
remove key from ignition.
Ensure that tiller is properly adjusted before driving the scooter.
After making any tiller angle adjustments and before use, the tiller MUST be
securely locked into position. Otherwise, a fall from the scooter could occur causing
bodily injury and/or damage to the scooter. Gently, push/pull against tiller to ensure
that the tiller is securely engaged into the adjustment plate.
NOTE:Forthisprocedure,refertoFIGURE 8.1.
NOTE:Thepoweredscootersfeatureanadjustabletiller.Thetillerlocksintooneofthreepositions.
NOTE:Thetillercanalsobefoldeddownandlockedintothispositionfortransportationand
storage.
1. Pulloutthetilleradjustmentleveruntilthepindisengagesfromthemountinghole.
2. Movethetillertothedesiredposition.
3. Releasethetilleradjustmentlevertolockthepinintothedesiredmountinghole.
4. Gentlypush/pullagainsttillertoensurethatthetillerissecurelylocked.
FIGURE 8.1 Adjusting the Tiller Angle
Tiller
Adjustment
Lever
Tiller Assembly
Mounting
Hole
Pin