Filter
Top Products
SECTION 5—MAINTENANCE AND TROUBLESHOOTING
Part No. 1145807 21 Lynx™L-3X
Troubleshooting
SYMPTOM PROBABLE CAUSE SOLUTION
Limited Driving Distance. Battery not charged long enough.
Batteries weak, won’t hold
charge.
Charge batteries overnight or ensure eight
hours of charge between use.
Replace batteries. Refer to Removing/
Installing the Batteries on page 35.
Batteries not Charging. Charger not working.
Battery connections loose.
No current at wall outlet.
Bad connection on charger,
charger cable, plug or internal
wiring problem.
Replace charger. Contact Dealer or a
qualified technician.
Check all connections. Secure connections.
Refer to Removing/Installing the Batteries
on page 35.
Switch another wall outlet.
Replace charger or internal repairs
required. Contact Dealer or a qualified
technician.
Batteries draw excessive
current when charging.
Battery failure. Replace batteries. Refer to Removing/
Installing the Batteries on page 35.
Battery indicator shows the
charge level is low too
soon after being recharged.
Charger not working.
Weak batteries.
Have charger checked. Service or replace
the charger. Contact Dealer or a qualified
technician.
Replace batteries. Refer to Removing/
Installing the Batteries on page 35.
Scooter will not drive. Brake release lever disengaged.
Batteries require charging.
Key not fully plugged in.
Charger plugged in.
Fuse blown in battery box.
Soft stop engaged. If key is turned
off while driving, the scooter
holds power for 1.5 seconds
slowly decelerating to a stop.
Battery connections loose.
Engage brake release lever. Refer to
Engaging/Disengaging the Brake Release
Lever on page 26.
Charge batteries. Refer to Charging the
Batteries on page 40.
Ensure key is inserted fully into keyswitch.
Unplug charger from scooter.
Contact Dealer or qualified technician.
With key in the off position, wait for 30
seconds and turn key to the on position.
Check all connections. Secure connections.
Refer to Removing/Installing the Batteries
on page 35.