Filter
Top Products
SECTION 7—SEAT AND ARMS
Part No. 1145807 27 Lynx™L-3X
SECTION 7—SEAT AND ARMS
ƽ WARNING
After any adjustments, repair or service and before use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power off and
remove key from ignition.
NOTE:RefertoLabelLocationsonpage 7forpinchpointlocation.
Removing/Installing the Seat
ƽ WARNING
Before use, ensure that the seat is in the locked position. The seat lever MUST be
pulled up to the 90° position to allow the seat to drop into the locked position. Oth-
erwise, a fall from the scooter could occur causing bodily injury and/or damage to
the scooter.
NOTE:Forthisprocedure,refertoFIGURE 7.1.
NOTE:Seatlockleverlocatedonleftsideofseat.
Removing
1. Folddownseatback.
2. Pulluptheseatlocklever.
3. Lifttheseatassemblyupandawayfromtheseatpost.
Installing
1. Lowertheseatassemblyontotheseatpost.
2. Pulltheseatlockleveruptoallowtheseattodropintothelockedposition.
3. Liftuponseatassemblytoensuretheseatissecure.
FIGURE 7.1 Removing/Installing the Seat
Seat Lock Lever
Seat
Assembly
Seat Post