Filter
Top Products
10. After you have entered all of the LDAP settings, validate them to make sure they are correct.
11. To test these settings, click on the Test LDAP Connection button. If you have entered valid settings you will
receive a message box stating that you have a successful connection otherwise you will be informed that you
connection has failed.
12. Click Next to continue.
Select the Learning Management System Server settings
13. Enter the following Learning Management System Server Settings for your Learning Management System
configuration:
• Base URL – Enter the base URL for accessing the Learning Management System Server. An example
setting would be: http://lms.acme.com/lms-lmm.
• Description – this is an optional text field to provide additional information about the Learning
Management System Server.
• User Name – Enter a user name for the Learning Management System Server. This will be used for
authenticating the Learning server when it communicates with the Delivery Server. The user name
provided here must be identical to the user name that was provided in the same install screen during the
installation of the Learning Management System Server.
• Password – Enter the password to be used for accessing the Learning Management System Server. This
will be used for authenticating the Learning Management System Server when it communicates with the
Delivery Server. The password provided here must be identical to the password that was provided in
the same install-screen during the installation of the Learning Management System Server.
Chapter 8: Installing the Delivery Server (DS) Application Files 31