Golden Technologies Companion II Mobility Aid User Manual


 
Companion 29
6 Flashes
Indicates that the thumb levers (see section V. “Operation) were not in the neutral
position when the key switch was turned to the “On” position.
May indicate that the PADDLE potentiometer is out of adjustment.
Remedy:
Turn the key switch to the “Off position.
Make certain that the thumb control levers are in the neutral position.
Turn the key switch to the “On” position.
If the above procedure does not solve the problem, contact your authorized Golden
Technologies, Inc. dealer.
7 Flashes
Indicates a problem with the thumb control levers.
May also indicate a problem with the potentiometer (speed control).
Your scooter will not operate until the problem is corrected.
Remedy:
Make certain that all electrical connectors are firmly and correctly joined.
If the connectors are all firmly joined and the problem is not solved, contact your
authorized Golden Technologies, Inc. dealer.
8 Flashes
Indicates a motor voltage problem.
Your scooter will not operate until the problem is corrected.
Remedy: Contact your authorized Golden Technologies, Inc. dealer.
9 Flashes
Indicates other internal errors or faults.
Your scooter will not operate until the problem is corrected.
Remedy: Contact your authorized Golden Technologies, Inc. dealer.
DIAGNOSTICS
Companion Owner's Manual: GC222, GC223, GC322, GC323, GC325, GC421