Filter
Top Products
ESA612
Users Manual
50
Making Point-To-Point Measurements
The Analyzer can make voltage, resistance, and low
current measurements through its Point-to-Point function.
To access the Point-to-Point function menu shown in
Figure 31, press R. Softkeys F1 through F3 are used
to select the measurement function.
fis108.jpg
Figure 31. Point-To-Point Function Menu
Measuring Voltage
To make a voltage measurement:
1. Press the softkey labeled Voltage from the
Point-To-Point menu.
2. Insert test leads in the RED (V/Ω/A ) and BLACK
jacks.
3. Place the probe tips across the unknown voltage and
read the measurement in the Analyzer’s display.
The Analyzer will measure up to 300 volts ac.
Measuring Resistance
To make a resistance measurement:
1. Press the softkey labeled Resistance from the
Point-To-Point menu.
2. Insert test leads in the RED (V/Ω/A ) and BLACK
jacks.
3. Null lead resistance by shorting the leads together
and pressing the softkey labeled Zero Leads.
4. Place the probes across the unknown resistance and
read the measurement in the Analyzer’s display.
The Analyzer will measure resistances up to 2.0 Ω.