Filter
Top Products
ESA612
Users Manual
2
Table 1. Symbols
Symbol Description
W
Important information; refer to manual.
X
Hazardous voltage
)
Conforms to relevant Canadian and US
standards
;
Conforms to relevant Australian EMC
requirements
P Conforms to European Union directives
~
Do not dispose of this product as
unsorted municipal waste. Go to Fluke’s
website for recycling information.
CAT II
IEC Measurement Category II – CAT II
equipment designed to protect against
transients from energy-consuming
equipment supplied from fixed
installations.
˜
Accessible Functional Earth Terminal
Safety Information
In this manual, a Warning identifies hazardous conditions
and actions that could cause bodily harm or death. A
Caution identifies conditions and actions that could
damage the Analyzer, the equipment under test, or cause
permanent loss of data.
XW Warning
To avoid possible electrical shock or
personal injury, follow these guidelines:
• Use this Analyzer only in the manner
specified by the manufacturer or the
protection provided may be impaired.
• Read the Users Manual before operating
the Analyzer.
• Do not connect the Analyzer to a patient or
equipment connected to a patient. The
Analyzer is intended for equipment
evaluation only and should never be used
in diagnostics, treatment or in any other
capacity where the Analyzer would come
in contact with a patient.
• Do not use the product in wet or damp
locations, around explosive gases or dust.