Filter
Top Products
Introduction 9
The following features or alarms turn on the open circles:
■
Dual/square wave bolus delivery
■
Basal patterns A or B
■
Temporary basal delivery
■
Block
■
Low reservoir
■
Low battery
Attention
Solid circles appear when insulin
delivery has stopped. This will hap-
pen if operator interaction is
required, an alarm warning is
received, or when the pump is sus-
pended. Alarm text; such as, Empty Reservoir will appear on the
screen if activated. The warnings will be explained on the screen
when programming buttons are pressed. Use the to view all of
the instructions on the screen. Press ESC and then ACT to clear
the alarm. Until the alarm is cleared, the pump is not delivering
insulin.
Solid circles indicate that INSULIN DELIVERY HAS BEEN
STOPPED.
The pump will beep/vibrate periodically when in the Attention or
Special modes to remind you of the condition. The beep/vibrate
frequency varies depending on the alarm.
MiniMed
These circles indicate
Attention mode.