Filter
Top Products
136 Chapter 11
When you see a alarm message on your pump’s screen:
1. Use the button to scroll down to read ALL of the alarm
text. There is often text that is not visible until you scroll down
using the button.
2. Follow the instructions in the alarm text.
3. Press ESC and then press ACT to clear the alarm.
4. Make sure all your settings (i.e., time and date) are correct.
E (Error)
After receiving this alarm, note
the error number then call
the 24-hour Product Help-line
for assistance.
An error alarm will indicate an E
followed by two numbers. The
example shown uses “xx” to
indicate numbers.
Off no power
The battery is dead. Replace bat-
tery immediately. Follow the
directions on the screen. Check
to make sure that the time is
correct on the screen. If not,
reset the time.
MiniMed
5:30A
Call help-line
ESC,ACT to clear
for assistance
Check all settings
Program as required
Exx
OFF
NO POWER
4:42A
Delivery Stopped
Use 1 AAA alkaline
ESC,ACT to clear
Replace Batt Now
0% batt life