Filter
Top Products
30 GF0600050RevE06, August 2006 Everest with Captain Seat Owner's Manual
2. Install second battery cable as described in step 1.
3. Ensure that all wires are connected as specified. Ensure that all connections are secure.
4. To retard corrosion, coat battery posts and terminals with petroleum jelly after all connections are
made.
5. Connect black connectors that connect battery cables to power cable.
6. Fasten battery straps.
7. Replace the cowl. Please see ADJUSTMENTS, COWL, Install cowl, and perform steps 1-3.
8. Replace the seat. Please see ADJUSTMENTS, SEAT, Install seat,
and perform steps 1-3.
9. Ensure that the circuit breaker located in the end cover is properly set by depressing its button (back
of wheelchair on front wheel drive, front of wheelchair on rear wheel drive).
10. Do not attempt to operate the wheelchair unless batteries are installed as instructed above.
11. Do not attempt to operate wheelchair until batteries are fully charged.
WARNING: Ensure that batteries are installed as described before operating wheel-
chair.
WARNING: Ensure that cowl is securely fastened to base frame, rear seat frame hooks
are engaged with rear base frame hooks, and that all four locking pins are
locked in place before occupying or operating wheelchair.
WARNING: Ensure that all cables are away from the moving parts of the wheelchair.