Filter
Top Products
12 GF0600050RevE06, August 2006 Everest with Captain Seat Owner's Manual
CONTROLLER
See picture at right. e controller is mounted be-
low the seat. e controller contains the connec-
tors to the rest of the wheelchair control system.
e connectors used by Everest are labelled in
the picture above - connectors not labelled in this
picture are not used by this wheelchair's control
system.
HAND CONTROL
See picture at right. e hand control is
mounted at the front of either arm. e
hand control contains the joystick, battery
charger receptacle (also used for the optional
programmer), mounting holes for the exten-
sion bracket, and those features found on the
control panel, shown on the next page: the
ON/OFF button, battery indicator, maxi-
mum speed/profile indicator, horn button,
speed profile decrease button, and speed/pro-
file increase button. eir descriptions follow.
Joystick
e joystick controls the speed and direction of wheelchair travel. e further you move the joystick
from the rest position, the faster your wheelchair will move. When the joystick is returned to the neutral
(center) position or released, the control system will bring the wheelchair to a smooth stop. Upon stop-
ping, electromechanical park brakes will engage to prevent the wheelchair from rolling.
Moving the joystick forward (away from the user) causes the wheelchair to move forward. Moving the
joystick back (toward the user) causes the wheelchair to travel in reverse. When the joystick is moved
right to 3 o'clock position, the wheelchair will turn to the right; when the joystick is moved left to
9 o'clock position, the wheelchair will turn to the left.
Battery charger receptacle (and optional programmer receptacle)
e receptacle for the battery charger (and optional programmer) is located on the underside of the con-
troller, as shown above. Use only the battery charger supplied with the wheelchair.
Controller cable
e controller cable plugs into the controller.
VR2 controller *
* VR2 is a trademark of
PG Drives Technology, Inc.
joystick
connector
motor 1
connector
motor 2 connector
power connector
(to batteries)
VR2 hand control
cable
controller
connector
joystick
control panel
battery charger
and programmer
receptacle
mounting holes