Filter
Top Products
17Everest with Captain Seat Owner's Manual GF0600050RevE06, August 2006
Adjust arm space from seat frame (width between arms)
Arm space from wheelchair is adjustable by changing the position of the lower arm tube in the seat tube.
Both arms are independently adjustable.
1. Turn adjustment knob to
free lower arm tube to move
inside seat tube (see picture at
right).
2. Slide lower arm tube to de-
sired position inside seat tube.
3. Turn knob to secure lower
arm tube inside seat tube.
Ensure that knob is tightened
enough to hold lower arm
tube firmly in place.
4. Perform steps 1-3 for other
arm.
5. Ensure that both arms are
mounted at the same distance
from seat frame.
WARNING: Ensure that lower arm tubes are locked in place before occupying or operat-
ing wheelchair.
Adjust arm height
Tools needed: M5 hex key
Arm height is adjustable by removing the screw that secures the upper arm inside the lower arm tube and
moving the upper arm to a new position. ere are three positions approximately
5
/8 inch apart.
1. Use M5 hex to remove the screw that secures the upper arm in
the lower arm tube (see picture at right).
2. Slide upper arm to desired position inside lower arm tube.
3. Reinstall screw. Use M5 hex key to tighten.
4. Perform steps 1-3 for other arm.
5. Ensure that both upper arms are mounted at the same height.
WARNING: Ensure that arms are secure before occupy-
ing or operating wheelchair.
right arm
lower tube
left arm
lower tube
adjustment knob
seat frame tube
adjust arm space from seat frame
(width between arms)
screw
upper arm
lower arm tube
adjust arm height