Filter
Top Products
21Everest with Captain Seat Owner's Manual GF0600050RevE06, August 2006
Adjust seat height (refer to the pictures on previous page)
Seat height has approximately one inch of adjustment. A small degree of extra tilt can also be gained by
placing the front of the seat in a higher position than the back of the seat.
1. Remove seat: Follow steps 1-4 in Remove seat on preceding page.
2. Remove the two locking pins that secure the rear seat mounts to the base frame at the rear of the
wheelchair.
3. Remove the two rear seat mounts and reinstall them in the desired position. Ensure that both rear
seat mounts are installed in identical positions.
4. Install the two locking pins that secure the rear seat mounts to the base frame.
5. Install seat: Follow steps 1-3 in the earlier section, Install seat
.
WARNING: Do not adjust seat height so that back is higher than front; this is an unsafe
position.