Filter
Top Products
28 GF0600050RevE06, August 2006 Everest with Captain Seat Owner's Manual
REMOVE AND INSTALL BATTERIES
WARNING: Batteries can supply a large amount of current. Do not wear jewelry or
watches when working on batteries. Take care not to connect the terminals
accidentally with anything metal; severe burns could result.
REMOVE BATTERIES
Tools needed: Group 22 batteries: two 1/2" wrenches; U1 batteries: two 7/16" wrenches
WARNING: Ensure that wheelchair power is off before removing batteries.
To access the batteries, you will first remove the seat and cowl.
1. Please see Section VI, ADJUSTMENTS, SEAT, Remove Seat, and perform steps 1-4.
2. Please see Section VI, ADJUSTMENTS, COWL, Remove Cowl, and perform steps 1-5.
3. e base frame and batteries will then be exposed.
4. Unfasten battery straps.
5. Disconnect black connectors at each battery that connect battery cables to power cable.
6. Lift batteries up and out of base frame.
7. Remove battery cables from both batteries:
Group 22 batteries: Use two
1
/2" wrenches to remove nuts and screws that secure wire terminals to
battery terminals. Set aside for reassembly.
U1 batteries: Use two
7
/16" wrenches to remove nuts and screws that secure wire terminals to battery
terminals. Set aside for reassembly.