Filter
Top Products
23Everest with Captain Seat Owner's Manual GF0600050RevE06, August 2006
FRONT RIGGING—CENTER-MOUNT FOOTREST
WARNING: Ensure that the lowest point on the footplates clears the ground safely dur-
ing ascent or descent.
Flip footplates up
(see picture at right)
Hold the footplates by the front
and fold them up against the center
tube.
Adjust footplate extension
length (see picture at right)
Footplate extension length is ad-
justable in two ways. You can either
adjust footplate extension length
individually by loosening the knob
and moving it to a different adjust-
ment hole, or adjust the position of
the footplate extension assembly on
the seat frame bracket.
Adjust individual footplate
extension length
1. Unscrew and remove adjust
-
ment knob.
2. Move footplate up or down in
center tube to adjust footplate to desired position.
3. Install and tighten knob.
4. Repeat for other footplate. Ensure that knobs are secure before occupying or operating wheelchair.
Adjust position of footplate extension assembly on seat frame bracket
Tools needed: M10 wrench, M4 hex key
1. Use M10 wrench and M4 hex key to remove mounting nuts and bolts, and remove footplate exten-
sion from seat frame bracket.
2. Reposition center tube in desired position on seat frame bracket.
3. Reinstall mounting nuts and bolts. Use M10 wrench and M4 hex key to tighten.
WARNING: Ensure that all parts of footrests are secure, and that footplate extension
assembly is securely mounted on seat frame, before occupying or operating
wheelchair.
adjust footplates
seat frame
footplate
extra angle mounting position
seat frame bracket
center tube
mounting
nut
adjustment knob
adjustment holes