Filter
Top Products
9
Getting Started
An Infrastructure wireless network contains a wireless access point or router. The
Infrastructure Network example, shown on the following page, contains the following
D-Link network devices:
A wireless Access Point - D-Link AirPremier
TM
AG DWL-7100AP
An Ethernet Router - D-Link DI-604
A laptop computer with a wireless adapter - D-Link AirPremier
TM
AG DWL-AG660
A desktop computer with a wireless adapter - D-Link AirPremier
TM
AG DWL-AG530
A Cable modem - D-Link DCM-201
If you need to assign IP addresses to the computers on the network, please
remember that the IP address for each computer must be in the same IP address
range as all the computers in the network, and the subnet mask must be exactly the
same for all the computers in the network.
For example: If the first computer is assigned an IP address of 192.168.0.2 with a
subnet mask of 255.255.255.0, then the second computer can be assigned an IP
address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP address, one or
more of the devices may not be visible on the network.
IP ADDRESS
Note: If you are using a DHCP-capable router in your network you will not
need to assign a static IP address.
Right out of the box, with its default settings, the DWL-7100AP will automatically connect
with other D-Link AirPremier
TM
AG products.