Filter
Top Products
35
Device Configuration>General (continued)
Using the AP Manager (continued)
User Limit: Enter the number of load balancing users, from 0-64.
•
•
•
Link Integrity: This pulldown selection enables or disables Link Integrity. When Link
Integrity is enabled, the wireless segment associated with the AP will be disconnected
whenever the connection between the AP and the LAN is dropped.
Telnet Support: This pulldown selection enables or disables the ability to Telnet into
the selected device(s).
Telnet Timeout: This pulldown selection defines the timeout period during a Telnet
session with the selected device(s).
• Load Balance: This pulldown selection enables or disables load balancing. When
you enable load balance you allow several access points to balance wireless network
traffic and wireless clients among the access points with the same SSID. All the APs
that share Load Balancing must have the same SSID. Assign each access point a
different non-overlapping channel (e.g., 1, 6, 11).