D-Link DWL-7100AP Mobility Aid User Manual


 
5
Better security with WPA- The DWL-7100AP can securely connect to wireless
clients on the network using WPA (Wi-Fi Protected Access) providing a much
higher level of security for your data and communications than has previously
been available.
Features
Faster Wireless Networking with speeds up to 108Mbps* in Super AG mode
Compatible with 802.11a, 802.11b and 802.11g Devices - Fully compatible with the
IEEE 802.11a, 802.11b and 802.11g standards, the DWL-7100AP can connect
with existing 802.11b-, 802.11g- or 802.11a- compliant wireless network adapter
cards.
LEDs
LED stands for Light-Emitting Diode. The DWL-7100AP Wireless Access Point has 5
Green LEDs as shown below:
Power
LAN (10/100)
WLAN
(802.11a and
802.11b or
802.11g)
A steady light indicates a connection to a power
source
A steady light indicates a connection to the Ethernet
port; a blinking light indicates activity
LED
LED Activity
A blinking light indicates activity in the respective
wireless mode: 802.11a and/or 802.11b/802.11g
*“Maximum wireless signal rate derived from IEEE Standard 802.11a and 80211g specifications. Actual data
throughput will vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual data throughput rate.”