Filter
Top Products
45
Using the AP Manager (continued)
Firmware
To upgrade the firmware:
• Download the latest firmware upgrade from http://support.dlink.com to an easy to
find location on your hard drive.
• Click on the firmware button as shown above.
• A popup window will appear. Locate the firmware upgrade file and click Open.
IMPORTANT! DO NOT DISCONNECT POWER FROM THE UNIT WHILE THE FIRMWARE IS
BEING UPGRADED.
You can upgrade the firmware by clicking on
this button after selecting the device(s).
You can customize the basic System Settings for
the DWL-7100AP by clicking on this button.
System Settings
• Access Password: This sets the
admin password for the selected
device(s).
• Auto Refresh: This setting allows
you to enable auto refreshing of
the network device list. By default
this option is disabled. If you
choose to enable it, you must enter
the refresh interval in seconds.
All other settings on this screen should
be left at the default setting.