Filter
Top Products
60
Assigning a Static IP Address in Windows XP/2000
Note: DHCP-capable routers will automatically assign IP addresses to the computers on the
network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a
DHCP-capable router you will not need to assign static IP addresses.
If you are not using a DHCP capable router, or you need to assign a static IP address,
please follow these instructions:
Go to Start.
Click on Control
Panel.
Networking Basics (continued)
This window will appear.
Click the Support tab.
Click Close.
Checking the IP Address in Windows XP