Filter
Top Products
Page 25
One Forward-Facing Wheelchair
and Occupant Belt Kit is supplied
for the restraint of one wheelchair
and occupant (details follow). “L”
track is mounted in three locations
in the vehicle for belt securement
(shown in Figure 1).
Note: Wheelchair passen-
gers shown in Figure 1 depict
the available seating positions.
Wheelchair capacity at Midpoint
(Position C) may have limitations
based on the physical dimensions
RIVSHFLÀFZKHHOFKDLUV$GGL-
tional Forward-Facing Wheelchair
and Occupant Belt Kits must be
purchased for the restraint of each
additional wheelchair passenger.
The Rampvan offers the following
options for placement and secure-
ment of wheelchair passengers.
Driver Seat: This seat (Position
A) can be removed and adaptive
driving systems custom tailored
for the driving wheelchair oc-
cupant can be purchased from
and installed by your local sales
representative.
)URQW3DVVHQJHU6HDWZLWK)ORRU
7UDFN The passenger seat (Posi-
tion B) can be removed and the
seat location can be utilized by a
wheelchair occupant.
0LGSRLQW/RZHUHG)ORRU$UHD
ZLWK)ORRU7UDFN The Midpoint
ORZHUHGÁRRUDUHD3RVLWLRQC) can
be utilized by wheelchair occu-
pants (capacity limitations apply).
Refer to the following guidelines,
illustrations, photos and instruc-
tions for proper use of the belt and
track restraint system.
WHEELCHAIR AND OCCUPANT RESTRAINT
Figure 1
A
C
B
Midpoint
“L”
Track
Front
Seat
“L”
Track
Front
Seat
“L”
Track
Midpoint
“L”
Track