Filter
Top Products
Page 16
OPERATION
$XWRPDWLF.QHHO6\VWHP
Kneeling is the lowering motion of
the Rampvan electro-mechanical
rear suspension. The kneel sys-
tem lowers the rear of the vehicle.
Lowering the rear of the vehicle
reduces the slope of the ramp.
.QHHO2Q2II)HDWXUHA Kneel
On/Off feature is incorporated into
the One-Touch electronic control
system. This feature provides
the option of kneeling the ve-
hicle when operating the power
door and power ramp. The Kneel
On/Off switch must be in the ON
position in order for the kneeling
system to be activated (see photo
at right). See page 12 for addi-
tional Kneel On/Off switch details.
The kneel system is automatically
activated by the One-Touch elec-
tronic control system.
When a control switch is pressed
to start the Open functions, the
power door opens, the kneel sys-
tem lowers the rear of the vehicle
and the ramp deploys.
When the Close functions are acti-
vated, the vehicle starts to raise at
the same time the ramp starts to
retract (stow).
Note: If the Rampvan is in the
kneeled position and the vehicle
is shifted out of Park, the vehicle
will raise and you will hear a very
rapid pulsing tone (cricket tone).
Press this switch to ON
to enable kneel feature.
Press this switch to OFF
to disable kneel feature.
.QHHO
2Q2II
Switch
Note: If the Rampvan is in the
kneeled position and the Close
functions are activated, the vehicle
will raise whether the Kneel On/Off
switch is on or off.