Filter
Top Products
Page 18
OPERATION
.QHHO0HFKDQLFDO2YHUULGH
In the event the Rampvan is in the
kneeled position and you experi-
ence a kneel system failure, use
the electrical override feature to
raise the rear of the vehicle if possi-
ble. If the kneel system cannot be
released using the electrical over-
ride, follow the kneel mechanical
override procedures outlined here.
Note: Although the mechanical
override feature is available to
raise the rear vehicle, mechani-
cal (manual) procedures cannot
EHDFFRPSOLVKHGUDSLGO\. Avoid
driving the Rampvan and have the
kneel system repaired immediately.
The kneel mechanical override fea-
ture allows the rear of the vehicle to
be raised to the normal position.
The kneel actuator assembly
is located under the third row
seat (driver side). A metal cover
protects the kneel assembly. The
motor end of the electric actuator
is visible in the access hole pro-
YLGHGLQWKHÁRRUPRXQWHGFRYHU
Use the wrench provided with the
Rampvan to turn the release nut
(release kneel system). Turn the
wrench as shown (toward front of
vehicle).
Use the Kneel Mechanical Over-
rideRQO\if the vehicle will not
raise electrically. Ensure the
Kneel On/Off switch is Off until
a service technician checks the
suspension system.
Kneel System Cover
Front
Kneel Motor Release Nut
Rear