Filter
Top Products
3-1
3
Operation
3-1
multiple operator controls. Equip-
ment power and outrigger controls are located at ground level. Boom lift and rotation
l and in the basket.
the latch decal. Open the control compartment cover. Unhook the support rod behind the
OPERATOR CONTROLS
The XLB-4319 Hydraulic Boom Lift is equipped with
controls are located at ground leve
Ground Control Station
The ground control station (Figure 3-1) operates the outriggers and lift booms. To access
the boom controls, reach into the cover latch port and release the cover latch according to
front edge of the cover and place the rod end into the mating hole in the battery bracket.
LATCH
DECAL
COVER
LATCH
PORT
CONTROL
COMPARTMENT
COVER
GROUND
CONTROL
STATION
Figure 3-1. Ground Control Station Access