Bil-Jax XLB-4319 Personal Lift User Manual


 
XLB-4319
1-4
NEVER allow electrode contact with any part of the basket if welding is being
performed from the platform.
NEVER use without the outriggers fully extended and firmly based.
NEVER override or by-pass manufacturer's safety devices.
NEVER attach a safety harness to an adjacent structure, pole, or equipment
while working from the boom platform.
NEVER move unit with a person or materials on board.
NEVER try to move the trailer with the boom extended.
NEVER stand or sit on cage bars. Work only within the work cage and do not
lean out over the cage to perform work.
NEVER attempt to increase working height with boxes, ladders, or other means.
NEVER operate this equipment when exposed to high winds, thunderstorms,
ice, or any other weather conditions that would compromise operator safety.
NEVER allow ropes, electric cords, hoses, etc. to become entangled in the
equipment when the basket is being raised or lowered.
NEVER exceed manufacturer's load limits or use the lift as a crane for lifting
heavy materials. Make sure all tools and equipment are safely stowed.
NEVER exceed load ratings by transferring loads to the basket at elevated
heights.
NEVER use cage to carry materials and never allow overhang of materials when
raising or lowering the basket.
NEVER push or pull with the boom or basket and NEVER use the boom to lift
any part of the trailer.
NEVER use the boom or basket to place a “dead man” load against any struc-
ture, materials, or equipment.
NEVER climb up or down boom.
NEVER leave the keys in the boom lift while unattended or not in use.