Filter
Top Products
Cleaning
Nio® medical display systems 111
Precautions
• Take care not to damage or scratch the panel.
• Do not apply pressure on the panel.
• Do not apply or spray liquid directly to the panel or cabinet
as excess liquid may cause damage to internal electronics.
•DO NOT USE:
- Strong alkalis lye
(Lye is a strong caustic alkaline solution of potassium salts,
obtained by leaching wood ashes. It is much used in making
soap, etc.)
- Acid
- Detergents with fluoride
- Detergents with ammonia
- Detergents with abrasives
- Steel wool
- Sponge with abrasives
- Cloth with thread made of steel
- Other coarse tools
Panel
Important:
We recommend to let this cleaning procedure be done in a Barco
service center. If not, you must perform the cleaning in a clean
and dust-free environment.
1. If there are dust particles on the LCD panel, blow them away
by using a dust remover. E.g., DUST OFF 67 (KONTAKT
Chemie).
A dust remover is composed of a blend of compressed liquid
gases functioning as propellant. They provide a jet of dry