ENGLISH
7474
Using the Built in Flash
✤ The FLASH SELECT function works in <M.Cam> mode only.
✤ You can take natural looking flash pictures with appropriate illumination
using the built-in flash, whether they are night scenes, in doors or in
other dark places.
■ OFF : The flash does not fire.
■ (Auto) : The flash comes on depending on the
brightness of the subject. When there is sufficient
light, the Auto flash icon will blink and the flash
does not fire.
■ (Red-eye reduction auto) : The flash pre-fires
automatically before the main firing to reduce the
red-eye. When there is sufficient light, the Red-eye
reduction auto icon will blink and the flash does not
fire.
■ (Flash on) : The flash comes on regardless of
the brightness of the subject.
Flash Select
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [MEMORY].
3. Press the [FLASH ( )] button.
4. Each time you press the [FLASH ( )] button, FLASH
mode is changed to;
√ < (Auto)>, < (Red-eye reduction auto)>,
< (Flash on)>and < (OFF)>.
Warning!
■ Do not fire the flash with the flash
bulb covered with your hand.
■ Do not fire the flash close to
people’s eyes.
[ Notes ]
■ The Auto and Red-eye reduction auto functions are
not availble while Exposure is in use.
■ When Red-eye reduction auto is set, the flash fires 3
times to perform red-eye reduction during 1.5
seconds.
■ The effective flash range is 7 ~ 10 feet.
✤ <M.Cam>
FLASH SELECT
✤
■
■
■
■
1. [Power] [CAMERA]
[Mode] [MEMORY]
[FLASH ( )]
[FLASH ( )] FLASH
√
< ( )>
■
■
[ ]
■
■
■
Digital Still Camera Mode
