ENGLISH
3030
Displaying the Date/Time (Date/Time)
/ ( / )
✤ The Date/Time function works in <Camera>/<Player>/<M.Cam>/
<M.Player> modes. ➥page 19
✤ The date and time are automatically recorded on a special data area
of the tape.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY].
3. Press the [MENU] button.
■
The menu list will appear.
4. Move the [Zoom] lever up or down to select
<Display>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select
<Date/Time>, then press the [OK] button.
6. Move the [Zoom] lever up or down to select the
display type of the Date/Time, then press the [OK]
button.
■
Display type of the Date/Time: <Off>, <Date>,
<Time>, <Date&Time>.
7. To exit, press the [MENU] button.
[ Notes ]
■
The Date/Time will read <00:00 1.JAN.2006> in
the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the
<Date/Time> in the Camcorder.
- When the Lithium Battery becomes weak or dead.
■
Before you use the <Date/Time> function, you must
set the clock. ➥page 23
✤
<Camera>
/<Player>
/<M.Cam>
/<M.Player>
(
/
/ / )
➥
19
✤
1. [Power] [CAMERA]
[PLAYER]
2. [Mode] [TAPE] [MEMORY]
3. [MENU]
■
4. [Zoom] <Display> (
), [OK]
5. [Zoom] <Date/Time>(
/ ), [OK]
6. [Zoom]
[OK]
■
<Off>
<Date> <Time>
<Date&Time>
7.
■
<00:00 1.JAN.2006>
<Date&Time>
■
<Date&Time>
➥
23
Initial Setting : Display Menu Setting
Move Select Exit
MENUOKZOOM
Camera Mode
√Display
LCD Bright
LCD Colour
Date/Time
TV Display
4
Move Select Exit
MENUOKZOOM
Off
Date
Time
Date&Time
