ENGLISH
6161
Playback
Audio Dubbing
✤ The Audio Dubbing function works only in <Player> mode. ➥page 19
✤ You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
✤ You can add sound to the original sound on a pre-recorded tape
recorded in SP mode with 12bit sound.
✤ Use the internal or an external microphone(not supplied) or other
audio equipment.
✤ The original sound will not be erased.
1. Set the [Power] switch to [PLAYER].
■
If you want to use an external
microphone, connect the microphone
to the external MIC input jack on the
Camcorder.
2. Set the [Mode] switch to [TAPE].
3. Press the [
√√
/❙❙ (PLAY/STILL)] button and
find the time frame of the scene to be
dubbed.
4. Press the [
√√
/❙❙ (PLAY/STILL)] button to
pause the scene.
5. Press the [A.DUB] button on the remote
control.
■
Audio Dubbing icon ( ) is displayed.
■
The Camcorder is ready for dubbing.
6. Press the [
√√
/❙❙ (PLAY/STILL)] button to
start dubbing.
■
Press the [■ (STOP)] button to stop
the dubbing.
[ Notes ]
■
You can not use the Audio Dubbing function while playing a write
protected video tape.
■
To utilize an external MIC or sound source, connect a microphone to
the MIC jack or use the Multi Cable to connect external sound source
input.
■
To dub an external sound source, set the <AV In/Out> function to
<AV In> (VP-D963i/D964Wi/D965Wi only). ➥page 66
✤
<Player> ( )
➥
19
✤
16
✤
12 SP
✤
✤
1. [Power]
[PLAYER]
■
,
2. [Mode] [TAPE]
3. [
√√
/
■ ■
(PLAY/STILL)]
4. [
√√
/
■ ■
(PLAY/STILL)]
5. [A.DUB]
■
■
6. [
√√
/
■■
(PLAY/STILL)]
■
[
■
(STOP)]
[ ]
■
■
MIC
Multi
■
, <AV In/Out> (AV / )
<AV In> (AV ) ( VP-D963i/
D964Wi/D965Wi)
➥ 66
