ENGLISH
3838
Basic Recording
Self Record using the Remote Control (Setting the Self Timer)
( )
✤ The SELF TIMER function works only in <Camera> mode.
➥page 19
✤ When you use the SELF TIMER function on the remote control, the
recording begins automatically in 10 seconds.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Press the [SELF TIMER] button until the appropriate
indicator is displayed.
4. Press the [Start/Stop] button to start the timer.
■
SELF TIMER starts counting down from 10 with a
beep sound.
■
If you want to cancel the SELF TIMER function
before recording, press the [SELF TIMER]
button.
5. Press the [Start/Stop] button again when you wish
to stop recording.
[ Notes ]
■
Do not obstruct the remote control sensor by putting
obstacles between the remote control and
Camcorder.
■
The remote control range is 4 ~5m (13 ~17 ft).
■
The effective remote control angle is up to 30
degrees left /right from the centre line.
■
Using a tripod is recommended for delayed
recording.
✤
<Camera> ( )
➥
19
✤
, 10
1. [Power] [CAMERA]
2. [Mode] [TAPE]
3. [SELF TIMER] ,
4. [Start/Stop]
■
10
■
,
[SELF TIMER]
5. , [Start/Stop]
[ ]
■
,
■
4 ~5m
■
30
■
œ
