A SERVICE OF

logo

Clock setup works in <Camera>/<Player>/<M.Cam>/<M.Player>
modes. page 19
The Date/Time is automatically recorded onto a tape. Before
recording, please set the <Date/Time>. page 30
1. Set the [Power] switch to [CAMERA] or
[PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY].
3. Press the [MENU] button.
The menu list will appear.
4. Move the [Zoom] lever up or down to select
<System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select
<Clock Set>, then press the [OK] button.
The year will be highlighted first.
6. Move the [Zoom] lever up or down to set
current <Year>, then press the [OK] button.
The month will be highlighted.
7. You can set the month, day, hour and minute
following the same procedure after setting the year.
8. Press the [OK] button after setting the minutes.
A message <Complete !> is displayed.
To adjust the clock, select the Year, Month, Day,
Hour or Min by pressing the [OK] button, then
move the [Zoom] lever up or down to
set respective values.
9. To exit, press the [MENU] button.
[ Notes ]
After the Lithium Battery loses its charge (after
about 6 months), the date/time appears on the
screen as <00:00 1.JAN.2006>.
You can set the year up to 2037.
If the Lithium Battery is not installed, any input data
will not be backed up.
ENGLISH
2323
<Camera>/<Player>/<M.Cam>/<M.Player>
(
/
/ / )
19
<Date/Time> < / >
30
1. [Power] [CAMERA]
[PLAYER]
2. [Mode] [TAPE] [MEMORY]
3. [MENU]
4. [Zoom] <System> ( )
[OK]
5. [Zoom] <Clock Set> (
) [OK]
6. [Zoom]
[OK]
7.
8. [OK]
<Complete !> ( !)
[Zoom]
9. [MENU]
6 <00:00
1. JAN,2006>
2037
Initial Setting : System Menu Setting
Setting the Clock (Clock Set)
Adjust Select Exit
MENUOKZOOM
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration
1 JAN 2006
00 : 00
Move Select Exit
MENUOKZOOM
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration
1 JAN 2006
00 : 00
Complete !
Camera Mode
System
Clock Set
Remote
Beep Sound
Language
Demonstration
On
On
English
On
Move Select Exit
MENUOKZOOM
4
5
8