ENGLISH
6565
✤ Audio Effect function works only in <Player> mode. ➥page 19
✤ Audio Effect provides various effects when the audio signals stored in
a tape are playing.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Insert the dubbed tape and press the [MENU]
button.
4. Move the [Zoom] lever up or down to select <Tape>,
then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Audio
Effect>, then press the [OK] button.
6. Move the [Zoom] lever up or down to select the
audio effect channel, then press the [OK] button.
■
<Voice>: It highlights the human voice from
the audio signals.
■
<Music>: It highlights the music sound by
enhancing the high and low pitched sounds from
the audio signals.
■
<Wide>: It magnifies the stereo effect by
enhancing the left and right sounds.
■
<Echo>: It gives an effect of echo sound heard
inside a cave or on the mountain top.
7. To exit, press the [MENU] button.
[ Notes ]
■
It is recommended to use stereo type output devices (TV, speakers)
for better audio effects.
■
The Audio Effect function is transmittable via external output
terminals such and DV.
■
Audio Effect function is not available in USB Streaming mode.
✤
<Player> ( )
➥
19
✤
1. [Power] [PLAYER]
2. [Mode] [TAPE]
3. [MENU]
4. [Zoom] <Tape> ( ,
[OK]
5. [Zoom] <Audio Effect> (
, [OK]
6. [Zoom] , [OK]
■
<Voice> ( :
■
<Music> ( :
■
<Wide> ( :
■
<Echo> ( :
7. [MENU]
[ ]
■
(TV, speakers)
■
■
USB Streaming
Playback
Audio Effect
Move Select Exit
MENUOKZOOM
√Sound[1]
√Off
Move Select Exit
MENUOKZOOM
Player Mode
√Tape
Photo Search
Photo Copy
Audio Select
Audio Effect
Off
Voice
Music
Wide
Echo
4
6
