ENGLISH
5757
Playback
Playing Back a Tape on the LCD Screen
✤ The Playback function and speaker works only in <Player> mode. ➥page 19
✤ You can monitor the playback picture on the LCD Screen.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Insert the tape you wish to view. ➥page 32
4. Open the LCD Screen.
■
Adjust the angle of the LCD Screen and set the
brightness or colour if necessary.
5. Press the [
œœœœ
(REW)] button to rewind the tape to the
starting point.
■
To stop rewinding, press the [■ (STOP)] button.
■
The Camcorder stops automatically after rewinding is
complete.
6. Press the [
√√
/❙❙ (PLAY/STILL)] button to start playback.
■
You can view the picture you recorded on the LCD
Screen.
■
To stop the play operation, press the [■ (STOP)]
button.
Adjusting the LCD Bright/LCD Colour during
Playback
✤ You can adjust the LCD Bright/LCD Colour during
playback.
✤ The adjustment method is the same procedure as used
in <Camera> mode. ➥page 29
Adjusting the Volume
✤ When you use the LCD Screen for playback, you can
hear recorded sound from the built-in Speaker.
- Take the following steps to lower the volume or mute
the sound while playing a tape on the Camcorder.
✤ When you hear sounds once the tape is in play, use the
[Zoom] lever to adjust the volume.
■
A volume level display will appear on the LCD Screen.
■
Levels may be adjusted from anywhere between
<00> to <19>.
■
If you close the LCD Screen while playing, you will
not hear sound from the speaker.
✤ When the Multi cable is connected to the Camcorder, you
cannot hear sound from the Built-In Speaker and cannot adjust the
volume.
✤ Volume control is disabled while PB Zoom is in use.
✤
<Player> ( )
➥
19
✤
1. [PLAYER]
2. [TAPE]
3.
➥
32
4.
■
5. [
œœœœ
(REW)]
■
, [
■
(STOP)]
■
6. [
√√
/
■■
(PLAY/STILL)]
■
■
, [
■
(STOP)]
✤
✤
<Camera> ( )
➥
29
✤
,
-
✤
, [Zoom]
.
■
■
<00> <19>
■
,
✤
,
✤
PB Zoom
