A SERVICE OF

logo

replacing printer consumables
Operator’s Guide 33
Ozone Filter
The ozone filter must be replaced every
time the developer unit is replaced.
Refer to the adjacent figure and perform
these steps:
1 Raise the top of the printer by firmly
pressing the button on the left of the
front panel.
2 Pull the old ozone filter, by its tab,
up and out of the printer and
discard it.
3 Remove the new ozone filter from
the plastic bag.
4 Hold the new ozone filter by its tab
and place the filter into the slot
inside the printer.
5 Close the top cover of the printer.
Ozone Filter