replacing printer consumables
Operator’s Guide28
Waste Toner Container
The waste toner container must be
replaced each time a new toner bottle is
opened, except when replacing start
toner.
note
If
toner is spilled, use a toner vacuum to
clean up the loose toner
. Do not use water
to clean the toner from the printer
. Any
toner remaining on clothes can be removed
with a cloth dampened in cold water; never
use hot water to remove toner from clothes.
Use care when handling toner
.
Refer to the adjacent figure and perform
these steps:
1 Raise the top of the printer by firmly
pressing the button on the left of the
front panel.
caution
Handle
the OPC drum unit with care. The
OPC drum unit can be damaged by
extended exposure to light and the drum
is easily scratched. Place the unit on a
flat surface while it is not in the printer
.
2 Remove the OPC drum unit by
lifting it carefully out of the printer
and place it on a flat surface.
3 Before removing the waste toner
container, place the green cap over
the filling hole. Once in place, the
green cap can not be removed.
4 Remove the old waste toner
container from the printer and
discard.
OPC
Drum Unit
W
aste T
oner
Container
