clearing paper jams
Operator’s Guide 13
After removing the jammed paper,
reload paper as described in the
“Loading Paper” section. To clear the
printer, close the top cover and press
ON LINE. For most emulation modes,
the jammed pages will automatically be
reprinted. After printing, verify that no
pages remain unprinted.
If a paper jam occurs while running
either a test print or a configuration
printout, pressing online is not
necessary to resume printing.
Jam at Fuser Input
warning
The
fuser operates at extremely high
temperature. A
void touching the fuser
.
Refer to the adjacent figure and perform
these steps:
1 Raise the top of the printer by firmly
pressing the button on the left side
of the front panel.
2 Tear of
f the paper at the perforation
nearest the OPC drum unit and
remove the paper.
3 Reload the paper. Refer to the
“Loading Paper” section.
4 Close the top cover of the printer
and wait for the printer to warm up.
5 Press ON LINE. Printing will
resume.
Perforation
OPC
Drum
Paper
Jam
Loose T
oner
