A SERVICE OF

logo

replacing printer consumables
Operator’s Guide32
caution
Only add Starter T
oner to the developer
unit during installation. DO NOT ADD
TONER.
T
oner should only be added following a
toner low message on the control panel
LCD. (The starter toner will print
approximately 200 pages at 5%.)
The procedure on page 24
shows a
toner bottle being used. Make sure you
use starter toner from the developer unit
kit.
7 Add the starter toner that comes
with the developer unit kit in the
same manner as directed on page
24.
8 Verify that the developer unit cover
is closed.
9 Close the top cover of the printer.