Loading Paper
Operator’s Guide 9
note
Verify
that all installation procedures in the
Setup Guide
have been completed before
loading the paper
.
Before loading paper
, make sure the Paper
Length and Paper W
idth options are set
properly in the Paper Control configuration
menu. Refer to the
Setup Guide
for details.
V
erify that the media meets the
requirements as described on page 1
1.
To
load paper:
1 Raise the top of the printer by firmly
pressing the top cover latch on the
left side of the front panel.
2 Insert paper into the front of the
printer. Press the tension release as
required to insert the paper
.
3 Unlock the tractors by pushing up
the tractor locks.
4 Adjust the width of the tractors so
that the paper is in the proper
position.
5 Open the tractor gates on the
tractor unit, place the paper on the
pins, and close the tractor gates.
6 Lock the tractor unit by pushing
down on the tractor locks.
Paper
Entrance
T
ension Release
T
ractor Gate
Tractor Locks
Tractor Pins
T
op Cover Latch
