A SERVICE OF

logo

FUEL SYSTEM 3-31
Fuel Tank
Connect the fuel hoses to the fuel tap as follows.
Vacuum Hose [A]
Fuel Pump Hose [B]
Be sure to clamps [C] the fuel hoses to prevent leakage.
Fuel Tap Inspection
Check the fuel tap filter screen [A] for any breaks or dete-
rioration.
If the filter screen has any break or is deteriorated, it may
allow dirt to reach the carburetor, causing poor running.
Replace the fuel tap.
If the fuel tap leaks, replace the damaged gasket [A] or
O-rings [B].
Apply grease to the lever [A].
Tighten:
Torque - Fuel Tap Plate Screws [A]: 0.8 N·m (0.08 kgf·m, 7
in·lb)