A SERVICE OF

logo

FINAL DRIVE 12-31
Front Axle
Press the inner race [A] using the cap [B] in the rotor puller
set (57001-1216) until it is bottomed.
Special Tool - Rotor Puller, M16/M18/M20/M22 × 1.5: 57001
-1216
Install:
Circlip [A]
Special Tool - Outside Circlip Pliers: 57001-144
Slide t he cage [B] on the inner race and install the steel
balls [C].
Apply the special grease [A] to the steel balls and cage.
Squeeze about half a tube (30 grams) of the special
grease [A] into the bearing cup [B].
Insert the balls and cage assembly in the bearing cup
strongly.