Kawasaki Brute Force 750 4x4i Manual

A SERVICE OF

next previous

FINAL DRIVE 12-23

Output Bevel Gears

Example 1: Decrease the thickness of the drive bevel gear

shim(s) by 0.1 mm (0.004 in.), and/or increase the thickness

of the driven bevel gear shim(s) by 0.1 mm (0.004 in.) to

correct the pattern shown below. Repeat in 0.1 mm (0.004

in.) steps if necessary.

Example 2: Increase the thickness of the drive bevel gear

shim(s) by 0.1 mm (0.004 in.), and/or decrease the thick-

ness of the driven bevel gear shim(s) by 0.1 m m (0.004

in.) to correct the pattern shown below. Repeat in 0.1 mm

(0.004 in.) steps if necessary.