● Duplex Unit (for 2-Sided Printing)
● Allow Manual Duplexing
● Printer Memory
● Printer Hard Disk
● Job Storage
● Mopier Mode
● Postscript Passthrough (PS Emulation Unidriver only)
Automatic Configuration
Tray 3
This control specifies whether you have Tray 3, an additional 500-sheet media feeder,
installed on your product. The default setting is Not Installed. In order to use Tray 3, you
must change this setting to Installed.
Tray 4
This control specifies whether you have Tray 4, an additional 500-sheet media feeder,
installed on your product. The default setting is Not Installed. In order to use Tray 4, you
must change this setting to Installed.
Duplex Unit (for 2-Sided Printing)
The HP Color LaserJet 4650dn, 4650dtn, and 4650hdn series printers come with a duplex
unit installed. This setting is enabled (Installed) by default.
The HP Color LaserJet 4650 printer supports smart duplexing. The product uses the smart
duplexing feature to detect information on both sides of the print job pages and only runs the
pages through the duplexing unit if there is printable information on the second side of the
page.
Allow Manual Duplexing
Some printer models do not support automatic 2-sided printing. However, you can print on
both sides of a page using manual 2-sided printing when this option is enabled.
Printer Memory
This option matches the setting to the amount of memory that is installed in the product. The
driver generates ranges of memory that can be selected, up to the maximum that the
product can accept. The driver can use this information to manage how the print driver uses
the product memory.
When a minimum total memory of 288 MB is installed, the Stored Job option and the
Mopier Mode are enabled in the print driver. The Stored Job option allows you to store print
jobs, and then print them later from the control panel. The multiple-original print (mopy)
function is an HP-designed feature that produces multiple, collated copies from a single print
job.
Printer Hard Disk
When this option is enabled, the Stored Job option and the Mopier Mode are enabled in
the print driver. The Stored Job option allows you to store print jobs, and then print them
later from the control panel. The multiple-original print (mopy) function is an HP-designed
feature that produces multiple, collated copies from a single print job.
Note
EN Chapter 4 HP PCL 6, HP PCL 5c, and HP PS 3 emulation unidrivers for Windows 199
