When using font cards with the PCL 6c drivers: To install screen fonts that match the font
card, use the .HPB file that is specifically designed to work with that card. If no screen fonts
exist for the card, use the .PCM file that is specifically designed to work with that card.
Allow Scaling from Large Paper
The Allow Scaling from Large Paper selection can be helpful, for example, when printing a
document with a large media size of 11 x 17 or A3. You can use the Print Document On:
setting on the Effects tab to print the document on a media size that is supported by the
printer.
Ignore Application Collation
This setting overrides collation options that are selected in a software program's print
options. Ignore Application Collation allows the print driver to collate in the most
appropriate way for the print job. The performance of this feature depends on the software
program that you are using.
Printer memory
The Total Memory group box shows the total amount of memory that is physically installed
in the product. The default values for total product memory are specified on the
Configuration tab. Total product memory is updated through a successful bidirectional
query, or can be set manually.
The Driver Work Space (DWS) value shows the amount of memory that is available for
keeping track of fonts that are downloaded from the driver. The driver deletes downloaded
fonts if it has exceeded the available memory value. The (DWS) value is a dynamic value
that varies depending on the specific configuration of the product. An accurate (DWS) value
optimizes driver performance.
The HP Traditional PCL 6 and HP Traditional PCL 5c drivers automatically configure the
(DWS) value in Windows 98, Windows Me, and Windows NT 4.0 environments that support
bidirectional communication. Use the (DWS) option to specify the amount of work-space
memory that is available to the product. To manually set the (DWS) value, print a
Configuration page and find the DWS value in the Memory section of the page. Then, click
the More... button on the Configuration tab, and type the DWS value in the (DWS) field of
the More Configuration Options dialog box.
Include types in application source list
The Include types in application source list check box is available only when using a
computer that is running Windows NT 4.0.
When the Include types in application source list check box is selected, all media types
(such as heavy media and transparencies) are available from the Source is: list on the
Paper tab. When you are in a software program, you can open the Paper tab by clicking
Print from the File menu, and then clicking Properties.
Automatic configuration
If you have modified the configuration of the HP Color LaserJet 4650 printer since
installation, click the Update Now button to automatically reflect the new configuration in the
driver. For more information about the print driver's automatic configuration feature, see the
Driver Configuration section of this guide.
Note
Note
EN Chapter 3 HP traditional print drivers for Windows 127
