● Printer Memory
● Printer Hard Disk
● Job Storage
● Mopier Mode
Tray 3
This control specifies whether you have Tray 3, an additional 500-sheet media feeder, installed
on your product. The default setting is Not Installed. In order to use Tray 3, you must change
this setting to Installed.
Tray 4
This control specifies whether you have Tray 4, an additional 500-sheet media feeder, installed
on your product. The default setting is Not Installed. In order to use Tray 4, you must change
this setting to Installed.
Duplex Unit (for 2-sided Printing)
The HP Color LaserJet 4650dn, 4650dtn, and 4650hdtn models are equipped with automatic 2-
sided printing (duplexing), which allows you to print on both sides of supported media. Automatic
2-sided printing is not supported for certain media types, including transparencies, labels,
envelopes, heavy, extra heavy, cardstock, and glossy film.
The HP Color LaserJet 4650 printer supports smart duplexing. The product uses the smart
duplexing feature to detect information on both sides of the print job pages and only runs the
pages through the duplexing unit if there is printable information on the second side of the page.
Printer Memory
This option matches the setting to the amount of memory that is installed in the product. The
driver generates ranges of memory that can be selected, up to the maximum that the product
can accept. The driver can use this information to manage how the print driver uses the product
memory.
When a minimum total memory of 288 MB is installed, the Stored Job option and the Mopier
Mode are enabled in the print driver. The Stored Job option allows you to store print jobs, and
then print them later from the control panel. The multiple-original print (mopy) function is an HP-
designed feature that produces multiple, collated copies from a single print job.
Printer Hard Disk
When this option is enabled, the Stored Job option and the Mopier Mode are enabled in the
print driver. The Stored Job option allows you to store print jobs, and then print them later from
the control panel. The multiple-original print (mopy) function is an HP-designed feature that
produces multiple, collated copies from a single print job.
Only the HP Color LaserJet 4650hdn comes with a hard disk installed.
Job Storage
If your HP Color LaserJet 4650 is equipped with a hard disk drive, the Job Storage option
should be enabled and all job storage options are available. If your HP Color LaserJet 4650 is
not equipped with a hard disk drive but has a minimum of 288 MB of memory, limited job storage
options are available. When job storage is enabled, the product can store print jobs so that you
can gain access to those print jobs later at the control panel.
Note
148 Device Settings tab EN
