14 Chapter 1 Troubleshooting control panel messages EN
DRUM LIFE LOW REPLACE DRUM KIT (4500)
-or-
DRUM LIFE LOW ORDER DRUM KIT (4550)
Approximately 80 percent of the drum’s life has been consumed.
l Continue printing and order the drum kit. Drum replacement will
be required in the near future.
DRUM LIFE OUT REPLACE DRUM KIT
The imaging drum has reached the end of its expected life.
l Replace the drum kit.
DUPLEXER ERROR CHECK DUPLEXER
An error has occurred in the duplex unit.
1. Verify that the duplex unit is correctly installed.
2. Verify that the small power cord from the duplex unit is plugged into
the printer, and the power cord from the AC outlet is plugged into
the duplex unit.
EIO X INITIALIZING YYY
alternates with
DO NOT POWER OFF
The EIO device in slot X is initializing. The YYY value will increment
every 10 seconds during this process.
l No action is required.
EIO X NOT FUNCTIONAL
The EIO slot specified does not have a card installed or is not
functional.
l No action is required.
EVENT LOG EMPTY
SHOW EVENT LOG
was selected from the Information Menu, but the
Event Log has no entries.
l No action is required.
www.GovTechMedia.com
