7. Maintenance, Warranty & Service
43
7. Maintenance, Warranty & Service
7.1. Cleaning the Touch
Screen
The touch screen can be cleaned with a soft cloth
and alcohol or a mild window cleaner.
IMPORTANT: Do not use any abrasive
cleansers or automotive chemicals on the
touch screen.
7.2. Cleaning and Inspecting
the Unit
When using the MaxiDAS
®
DS708 unit, make
sure to do the following:
1. Check the housing, wiring, and adaptors for
dirt and damage before and after each use.
2. At the end of each working day, clean the
MaxiDAS
®
DS708 housing, wiring, and
adapters with a clean damp cloth.
IMPORTANT: Do not use any abrasive
cleansers or automotive chemicals on the
MaxiDAS
®
DS708 unit.
7.3. Quick Troubleshooting
Tips
1. Ensure that the scan tool is connected to a
power source and the Power LED light is
illuminated.
2. Ensure that the SD card is inserted into the
scan tool.
3. Ensure that the scan tool has been registered.
4. Ensure that the system software and
diagnostic application software are properly
updated.
5. Ensure that the scan tool is connected to the
Internet.
6. Check all cables, connections and indicators
to see if the signal is being received.
7. Do not use the scan tool beside microwave
ovens, cordless phones and some medical or
scientific instruments to prevent signal
interference.
8. Ensure that the computer installed with the
PCLink software is connected to a printer.
9. Ensure that the computer is connected to a
network if any of the scan tool’s functions are
to be realized on the computer.
If your problems persist, please contact Autel
Tech Support or your local selling agent.
