5. System Setup
38
5.10. Remote Desk
The Remote Desk function allows you to view the
screen of the scan tool on a computer and it also
makes controlling the scan tool from a computer
possible.
1. Ensure that the VNC Viewer has been
properly installed into your computer. If not,
please refer to Section 2.3 Install the PC
Software on page 9.
2. Follow the instructions in the General
Procedures on page 33 to display the
Setup/Help screen.
3. Click on the Remote Desk icon and wait for
“CEVNC: Current User Properties” window
to pop up. Click on OK or Apply to make it
effective.
Figure 5.10: Remote Desk
NOTE: To make Remote Desk safer, click on
“Require Password” and enter a password.
To view the screen on a PC without having
the PC to control the scan tool, click on
“Disable Remote Keyboard & Pointer”.
4. Open the client software of VNC Viewer on
your PC and wait for the “VNC viewer:
Connection Details” window to pop up.
5. Enter Wireless IP Information (please check
the Wi-Fi settings to obtain the information)
in the Server box.
Figure 5.11: VNC Viewer
6. Set the Encryption box as “always off” if you
have not set a password in step 2.
7. Click on OK
NOTE: If you have set a password in step 2,
a “VNC Viewer: Authentication [No
Encryption]” window will pop up. You are
required to enter your password.
Figure 5.12: VNC Viewer: Password
5.11. About
The About function provides information of the
scan tool regarding the version, hardware, product
ID, copyright, and etc.
1. Follow the instructions in the General
Procedures on page 33 to display the
Setup/Help screen.
2. Click on the About icon and wait for the
About window to pop up.
3. Click on OK to exit.
